1 files changed, 322 insertions, 0 deletions
diff --git a/.config/picom.conf b/.config/picom.conf
new file mode 100644
index 0000000..b3c84bd
--- /dev/null
+++ b/.config/picom.conf
@@ -0,0 +1,322 @@
+# Thank you code_nomad: http://9m.no/ꪯ鵞
+# and Arch Wiki contributors: https://wiki.archlinux.org/index.php/Compton
+
+#################################
+#
+# Backend
+#
+#################################
+
+# Backend to use: "xrender" or "glx".
+# GLX backend is typically much faster but depends on a sane driver.
+backend = "glx";
+
+#################################
+#
+# GLX backend
+#
+#################################
+
+glx-no-stencil = true;
+
+# GLX backend: Copy unmodified regions from front buffer instead of redrawing them all.
+# My tests with nvidia-drivers show a 10% decrease in performance when the whole screen is modified,
+# but a 20% increase when only 1/4 is.
+# My tests on nouveau show terrible slowdown.
+glx-copy-from-front = false;
+
+# GLX backend: Use MESA_copy_sub_buffer to do partial screen update.
+# My tests on nouveau shows a 200% performance boost when only 1/4 of the screen is updated.
+# May break VSync and is not available on some drivers.
+# Overrides --glx-copy-from-front.
+# glx-use-copysubbuffermesa = true;
+
+# GLX backend: Avoid rebinding pixmap on window damage.
+# Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe).
+# Recommended if it works.
+# glx-no-rebind-pixmap = true;
+
+# GLX backend: GLX buffer swap method we assume.
+# Could be undefined (0), copy (1), exchange (2), 3-6, or buffer-age (-1).
+# undefined is the slowest and the safest, and the default value.
+# copy is fastest, but may fail on some drivers,
+# 2-6 are gradually slower but safer (6 is still faster than 0).
+# Usually, double buffer means 2, triple buffer means 3.
+# buffer-age means auto-detect using GLX_EXT_buffer_age, supported by some drivers.
+# Useless with --glx-use-copysubbuffermesa.
+# Partially breaks --resize-damage.
+# Defaults to undefined.
+#glx-swap-method = "undefined"; #deprecated !
+#use-damage = true
+
+#################################
+#
+# Shadows
+#
+#################################
+
+# Enabled client-side shadows on windows.
+shadow = false;
+# The blur radius for shadows. (default 12)
+shadow-radius = 5;
+# The left offset for shadows. (default -15)
+shadow-offset-x = -5;
+# The top offset for shadows. (default -15)
+shadow-offset-y = -5;
+# The translucency for shadows. (default .75)
+shadow-opacity = 0.3;
+
+# Set if you want different colour shadows
+# shadow-red = 0.0;
+# shadow-green = 0.0;
+# shadow-blue = 0.0;
+
+# The shadow exclude options are helpful if you have shadows enabled. Due to the way picom draws its shadows, certain applications will have visual glitches
+# (most applications are fine, only apps that do weird things with xshapes or argb are affected).
+# This list includes all the affected apps I found in my testing. The "! name~=''" part excludes shadows on any "Unknown" windows, this prevents a visual glitch with the XFWM alt tab switcher.
+shadow-exclude = [
+    "! name~=''",
+    "name = 'Notification'",
+    "name = 'Plank'",
+    "name = 'Docky'",
+    "name = 'Kupfer'",
+    "name = 'xfce4-notifyd'",
+    "name *= 'VLC'",
+    "name *= 'compton'",
+    "name *= 'picom'",
+    "name *= 'Chromium'",
+    "name *= 'Chrome'",
+    "class_g = 'Firefox' && argb",
+    "class_g = 'Conky'",
+    "class_g = 'Kupfer'",
+    "class_g = 'Synapse'",
+    "class_g ?= 'Notify-osd'",
+    "class_g ?= 'Cairo-dock'",
+    "class_g ?= 'Xfce4-notifyd'",
+    "class_g ?= 'Xfce4-power-manager'",
+    "class_g ?= 'Dmenu'",
+#	"class_g ?= 'Dunst'",
+# disables shadows on i3 frames
+#	"class_g ?= 'i3-frame'"
+#    "_GTK_FRAME_EXTENTS@:c",
+#    "_NET_WM_STATE@:32a *= '_NET_WM_STATE_HIDDEN'"
+];
+# Avoid drawing shadow on all shaped windows (see also: --detect-rounded-corners)
+shadow-ignore-shaped = false;
+
+#################################
+#
+# Opacity
+#
+#################################
+
+inactive-opacity = 0.90;
+active-opacity = 0.95;
+frame-opacity = 1;
+inactive-opacity-override = false;
+
+# Dim inactive windows. (0.0 - 1.0)
+# inactive-dim = 0.2;
+# Do not let dimness adjust based on window opacity.
+# inactive-dim-fixed = true;
+
+#################################
+#
+# Fading
+#
+#################################
+
+# Fade windows during opacity changes.
+fading = true;
+# The time between steps in a fade in milliseconds. (default 10).
+# fade-delta = 100;
+# Opacity change between steps while fading in. (default 0.028).
+fade-in-step = 0.03;
+# Opacity change between steps while fading out. (default 0.03).
+fade-out-step = 0.03;
+# Fade windows in/out when opening/closing
+# no-fading-openclose = true;
+
+# Specify a list of conditions of windows that should not be faded.
+fade-exclude = [ ];
+
+#################################
+#
+# Other
+#
+#################################
+
+# Try to detect WM windows and mark them as active.
+mark-wmwin-focused = true;
+# Mark all non-WM but override-redirect windows active (e.g. menus).
+mark-ovredir-focused = true;
+# Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused instead of using FocusIn/Out events.
+# Usually more reliable but depends on a EWMH-compliant WM.
+use-ewmh-active-win = true;
+# Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on.
+detect-rounded-corners = true;
+
+# Detect _NET_WM_OPACITY on client windows, useful for window managers not passing _NET_WM_OPACITY of client windows to frame windows.
+# This prevents opacity being ignored for some apps.
+# For example without this enabled my xfce4-notifyd is 100% opacity no matter what.
+detect-client-opacity = true;
+
+# Specify refresh rate of the screen.
+# If not specified or 0, picom will try detecting this with X RandR extension.
+refresh-rate = 0;
+
+# Vertical synchronization: match the refresh rate of the monitor
+vsync = false;
+
+# Enable DBE painting mode, intended to use with VSync to (hopefully) eliminate tearing.
+# Reported to have no effect, though.
+dbe = false;
+
+# Limit picom to repaint at most once every 1 / refresh_rate second to boost performance.
+# This should not be used with --vsync drm/opengl/opengl-oml as they essentially does --sw-opti's job already,
+# unless you wish to specify a lower refresh rate than the actual value.
+#sw-opti = true;
+
+# Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games.
+# Known to cause flickering when redirecting/unredirecting windows.
+unredir-if-possible = true;
+
+# Specify a list of conditions of windows that should always be considered focused.
+focus-exclude = [ "class_g = 'Cairo-clock'" ];
+
+# Use WM_TRANSIENT_FOR to group windows, and consider windows in the same group focused at the same time.
+detect-transient = true;
+# Use WM_CLIENT_LEADER to group windows, and consider windows in the same group focused at the same time.
+# WM_TRANSIENT_FOR has higher priority if --detect-transient is enabled, too.
+detect-client-leader = true;
+
+#################################
+#
+# Window type settings
+#
+#################################
+
+wintypes :
+{
+  tooltip :
+  {
+    fade = true;
+    shadow = false;
+    opacity = 0.85;
+    focus = true;
+  };
+  fullscreen :
+  {
+    fade = true;
+    shadow = false;
+    opacity = 1;
+    focus = true;
+  };
+};
+
+######################
+#
+# XSync
+# See: https://github.com/yshui/picom/commit/b18d46bcbdc35a3b5620d817dd46fbc76485c20d
+#
+######################
+
+# Use X Sync fence to sync clients' draw calls. Needed on nvidia-drivers with GLX backend for some users.
+xrender-sync-fence = true;
+
+#opacity-rule = [
+#"99:name *?= 'Call'",
+#"99:class_g = 'Chromium'",
+#"99:name *?= 'Conky'",
+#"99:class_g = 'Darktable'",
+#"50:class_g = 'Dmenu'",
+#"99:name *?= 'Event'",
+#"99:class_g = 'Firefox'",
+#"99:class_g = 'GIMP'",
+#"99:name *?= 'Image'",
+#"99:class_g = 'Lazpaint'",
+#"99:class_g = 'Midori'",
+#"99:name *?= 'Minitube'",
+#"99:class_g = 'Mousepad'",
+#"99:name *?= 'MuseScore'",
+#"90:name *?= 'Page Info'",
+#"99:name *?= 'Pale Moon'",
+#"90:name *?= 'Panel'",
+#"99:class_g = 'Pinta'",
+#"90:name *?= 'Restart'",
+#"99:name *?= 'sudo'",
+#"99:name *?= 'Screenshot'",
+#"99:class_g = 'Viewnior'",
+#"99:class_g = 'VirtualBox'",
+#"99:name *?= 'VLC'",
+#"99:name *?= 'Write'",
+#"93:class_g = 'URxvt' && !_NET_WM_STATE@:32a",
+#"0:_NET_WM_STATE@:32a *= '_NET_WM_STATE_HIDDEN'",
+#"96:_NET_WM_STATE@:32a *= '_NET_WM_STATE_STICKY'"
+#];
+
+
+#################################
+#     Background-Blurring       #
+#################################
+
+
+# Parameters for background blurring, see the *BLUR* section for more information.
+# blur-method =
+# blur-size = 12
+#
+# blur-deviation = false
+
+# Blur background of semi-transparent / ARGB windows.
+# Bad in performance, with driver-dependent behavior.
+# The name of the switch may change without prior notifications.
+#
+# blur-background = true;
+
+# Blur background of windows when the window frame is not opaque.
+# Implies:
+#    blur-background
+# Bad in performance, with driver-dependent behavior. The name may change.
+#
+# blur-background-frame = false;
+
+
+# Use fixed blur strength rather than adjusting according to window opacity.
+# blur-background-fixed = false;
+
+
+# Specify the blur convolution kernel, with the following format:
+# example:
+#   blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
+#
+# blur-kern = ''
+# blur-kern = "3x3box";
+
+blur: {
+  # requires: https://github.com/ibhagwan/picom
+  method = "kawase";
+  #method = "kernel";
+  strength = 7;
+  # deviation = 1.0;
+  # kernel = "11x11gaussian";
+  background = false;
+  background-frame = false;
+  background-fixed = false;
+  kern = "3x3box";
+}
+
+# Exclude conditions for background blur.
+blur-background-exclude = [
+  #"window_type = 'dock'",
+  #"window_type = 'desktop'",
+  #"class_g = 'URxvt'",
+  "class_g = 'slop'",
+  "class_g = 'i3status'",
+  "_GTK_FRAME_EXTENTS@:c",
+  "window_type = 'menu'",
+  "window_type = 'tooltip'",
+  "window_type = 'popup_menu'",
+  "window_type = 'dropdown_menu'",
+  "window_type = 'dock'",
+  "window_type = 'desktop'"
+];